|
Hanging Kid Feeder |
|
INSTRUCTIONS
You can bet that it will be such a handy item for hanging in your barn f or through your fence that you might want to think about making more than one when you begin. This is so simple anyone can do it. All you need are: Skill saw Sander Drill 3 "U" brackets and 3.4 inch plywood, scraps will do as long as you can get the dimensions out of it. View 1
1. Feeder is 8 inches W x 8 inches H x 40 inches long 2. U Brackets are to be mounted 2 inches from each end and 1 in the center View 2
Drill holes for nails before nailing togeather. This will keep wood from splitting out. Also predrill holes for mounting "U" Brackets, which will be mounted in an upside down position to enable to hang across fence or you can sink 2 posts and place a 2 x 4 across it and hang from there. By making more than one, especially if you have several kids to grain, you will find you save a lot of time. Feeders are easy to take off and take inside barn when done to keep clean.
|
|
|
